airMAX PowerBeam 5AC 620
airMAX PowerBeam 5AC 620
Product Details
Using AirMax ac technology, the Ubiquiti PowerBeam AC supports up to 450+ Mbps real TCP/IP throughput.
Ubiquiti's AirMax engine with custom Integrated Circuit dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the AirMax scheduler, to support the high data rates and dense modulation used in AirMax ac technology.
Quick assembly - The number of fasteners was reduced to simplify assembly. Tools are required only when the technician mounts the PowerBeam on the pole. Easy removal - The antenna feed can be detached with the push of a button. Dish and brackets - Made of galvanized steel that is powder-coated for superior corrosion resistance.
Innovative Mechanical Design
Corrosion Resistance
Built-in mechanical tilt - The mounting bracket conveniently offers 20 of uptilt and up to 20 of downtilt. Fasteners - GEOMET-coated for improved corrosion resistance when compared with zinc-plated fasteners.
The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.
Regional regulations must be observed when deploying radio equipment. More info
Package Contents
- 1x Bolt Set
- 1x Rear Housing
- 1x PoE Injector
- 1x Antenna Feed
- 2x Pole Clamps
- 1x Lower Pole Bracket
- 1x Brace
- 1x Dish Reflector with Mounting Bracket
- 2x Stabilizer Brackets
- 1x Support Arm
- 1x UK Mains Cable
- 1x Upper Pole Bracket Assembly
Product Features
- Airmax AC with custom IC
- Gigabit Ethernet
- Up to 450+ Mbps throughput
Product Specifications
System
LEDs | LAN, Power and WLAN |
Extras | GPS Antenna and Reset Button |
RouterOS Level | 7 |
Processor Name | Atheros |
Router Throughput 5GHz | 450 Mbps |
Operating System | AirOS |
Processor Speed | 720 MHz |
Storage Type | Flash |
Processor Architecture | MIPS 74Kc |
Processor Cores | 1 |
Storage | 8 MB |
Memory | 128 MB |
Memory Type | DDR2 |
Networking
10/100/1000 PoE In | 1 |
Wireless
Channel Width | 60, 80, 50, 30, 20, 40 and 10 MHz |
Rx Sensitivity | -96 dBm |
VSWR | 1.5:1 |
Polarisation | Dual Linear |
Transmit Power | 251 mW |
Gain | 29 dBi |
Antenna Type | Dish |
Wireless Standards | 802.11ac |
Band | 5 GHz |
Frequency Min | 5150 MHz |
Frequency Max | 5875 MHz |
The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.
Regional regulations must be observed when deploying radio equipment. More info
Power Input
PoE Max | 26 V |
PoE Min | 20 V |
PoE Ports | 1 |
PoE Pins | 4/5(+),7/8(-) |
Power Consumption | 8.5 W |
Current Min | 0.5 A |
PoE Type | Passive |
Physical
Mechanical Downtilt Min | -15 ° |
Mechanical Downtilt Max | 15 ° |
Mounting | Pole |
Case Material | Plastic |
Dimensions | 620 x 386 x 620 mm |
Weight | 6400 g |
Environmental
Operating Humidity Min | 5 % RH |
Operating Temperature | -40 to 70 °c |
Wind Survial | 200 Km‾h |
Wind Loading | 872N @ 200km/h N @ Km‾h |
ESD/EMP Protection | ± 24kV Air / Contact |
Operating Humidity Type | NonCondensing |
UV Resistant | ETS 300 019-1-4 |
Operating Humidity Max | 95 % RH |
Compliance
RoHS | Yes |
Certifications | RCM, FCC, IC and CE |
Polar Diagrams
These polar diagrams are a guideline only. For detailed polar diagrams please refer to official manufacturer datasheets.