Outdoor enclosure for PC Engines ALIX 3D2 and PC Engines ALIX 3D3 system boards.
Industrial die-cast Aluminum design to withstand the toughest environments, the WRAP-BOX outdoor enclosure is a small, light, yet very solid wireless outdoor enclosure. The WRAP-BOX enclosure for ALIX 3D2 and ALIX 3D3 is rated NEMA-67 providing complete protection against ingress of dust (6) as well as protection against immersion in water (7).
The WRAP-BOX enclosure comes in three configurations:
1 N-Type connector + 1 RJ-45 quick disconnect (model 1A1E)
2 N-Type connectors + 1 RJ-45 quick disconnect (model 2A1E)
4 N-Type connectors + 2 RJ-45 quick disconnect (model 4A2E)
The N-Type antennas connectors are placed as far as possible from each other in order to increase spatial diversity and decrease RF grounding from the mounting mast. Multiple Antennas can be used for repeater operation, multiple band or MIMO smart antenna applications.
2nd RJ-45 connector (available only on the 4A2E model) can be used as optional ethernet or console port.
Thermal Characteristics
- Enclosure Seal Operating temperature -60C to 230C
- Heat Trap: +6.5 Celsius under full sun (~100,000 Lux)
- Temperature raise using a 5-10Watt heat source (WRAP + radio board): +5.5 Celsius
Mechanical Characteristics
- Inside measurements: 180x125mm x 46mm
- Wall thickness: 3mm
- Supports masts up to 3" diameter
Board Support
- Native support for PC Engines ALIX 3D2 and PC Engines ALIX 3D3 boards
- Native support for nano-ITX boards
- Other boards types require mounting plate |
Basket
