Patch App & Go PAGT/B3 Network Tester & Tracer with 24 x Smart Remote Plugs, USB Charging Cable & Soft Carry Case
Patch App & Go Network Tester & Tracer with 24 x Smart Remote Plugs, USB Charging Cable & Soft Carry Case
The Patch App & Go Continuity Tester is suitable for testing Cat 5e, Cat 6, Cat 6, unshielded and shielded network cables. As the device performs each test the results will appear as a pass or fail on your mobile device. The app will visually display the fault when a fail is detected. Patch App & Go will Instantly identify wiremap errors such as mis-wires, split pairs, shorts and open ends.
Patch App & Go simplifies the process of tracing unidentified network cables. By inserting the Smart Remote Plugs into the ports of a Patch Panel, Patch App & Go will send a trace through the cable to the uniquely numbered Smart Remote Plug, notifying the user of plugs ID, allowing the user to correctly label the link.
An Affordable Solution for testing & Tracing
Utilising the Patch App & Go Continuity Tester removes the need to deploy two installers on to a site and speeds up the process of running tests and checks on your own.
Compatible with Multiple Cable Types
The Patch App & Go Tracer and Plugs are capable of testing twisted pair Cat 3, Cat 5, Cat 5e, Cat 6, Cat 6a UTP & STP cables of any length.
Patch App & Go Cannot Be Used In Conjunction With PoE Switches.
- 1x Charging Cable
- 1x Protective Carry Case
- 1x Network Tester & Cable Tracer
- 24x Smart Remote Plugs (Numbered 1 - 24)
- PDF Test Reports
- One-Man Operation
- Wiremap for Miswires, Split Pairs, Shorts and Open Ends
|PAG Dongle Weight||67 g|
|PAG Remote Plug Weight||7 g|
|Dimensions (PAG Dongle)||84 x 33 x 31 mm|
|Dimensions (PAG Smart Plug)||52 x 14 x 10 mm|
|Max Operating Humidity||90 % RH|
|Operating Temperature||50 to 0 °c|
|Storage Temperature||-20 to 70 °c|
|Min Operating Humidity||10 % RH|
|Compliance||EN 55022:2006+A1:2007 EN 55024:1998+A1:2001+A2:2003|