End-to-end support services for your networking needs
View Basket
0 items
Basket Total: £ 0.00

airMAX PowerBeam M5 400 ISO (5 Pack)

airMAX PowerBeam M5 400 ISO (5 Pack)

airMAX PowerBeam M5 400 ISO (5 Pack)
airMAX PowerBeam M5 400 ISO (5 Pack)
Manufacturer:
Ubiquiti Inc.
MPN:
PBE-M5-400-ISO
Order Code:
PBE-M5-25-ISO/5
Quick Code:
#1777
£479.00 ex. VAT
(£574.80 inc. VAT)
Call us for stock information
Ubiquiti Inc.

Product Details

The new Ubiquiti PowerBeam M5 25dBi has a compact design with uniform beam width, efficient footprint and a faster processor. The PowerBeam can be easily mounted in a variety of ways thanks to the innovative mechanical design. The Ubiquiti PowerBeam directs RF energy into a tighter beamwidth resulting with the focus in one direction so the PowerBeam blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.

This model of the PowerBeam leverages Ubiquiti's InnerFeed technology which integrates the radio into the feedhorn of the antenna, so there is no need for any cable, improving performance by eliminating cable losses. By providing increased performance with its faster processor and innovative mechanical design at a low cost, the PowerBeam is extremely versatile and cost-effective to deploy.

The PowerBeam M5 25dBi ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference. With its combination of focused beam directivity and RF isolation, the PowerBeam ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency


Innovative Mechanical Design

Corrosion Resistance

Built-in mechanical tilt - The mounting bracket conveniently offers 20 of uptilt and up to 20 of downtilt.

Quick assembly - The number of fasteners was reduced to simplify assembly. Tools are required only when the technician mounts the PowerBeam on the pole.

Easy removal - The antenna feed can be detached with thepush of a button.

Fasteners - GEOMET-coated for improved corrosion resistance when compared with zinc-plated fasteners.

Dish and brackets - Made of galvanized steel that is powder-coated for superior corrosion resistance.

Mounting - Redesigned pole bracket for the 400 mm dish and fender washers for the 300 mm dish prevent paint from being removed from the metal brackets for improved corrosion resistance.


PowerBeam Dish Diagram

The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.
Regional regulations must be observed when deploying radio equipment. More info

Package Contents

  • 5x Reflector
  • 5x Adjustment Bracket
  • 5x Rear Housing
  • 5x Mounting Bracket
  • 5x Antenna Feed
  • 5x Pole Clamp
  • 5x Radome
  • 5x Nut and Bolt Set
  • 5x PoE Injectors
  • 5x Mains Cable

Product Features

  • Uniform Beamwidth Maximizes Noise Immunity
  • Integrated Isolator Design Improves RF Isolation
  • High-Speed Processor for Superior Performance

Product Specifications

System

LEDs LAN, Power and WAN
Operating System AirOS
Processor Name Atheros
Router Throughput 5GHz 150 Mbps
Extras Reset Button
RouterOS Level 7
Processor Speed 560 MHz
Storage Type Flash
Processor Cores 1
Processor Architecture MIPS 74Kc
Storage 8 MB
Memory 64 MB
Memory Type DDR2

Networking

10/100 PoE In 1

Wireless

Antenna Type Dish
Channel Width 40, 10, 20, 8, 30 and 5 MHz
Gain 25 dBi
Polarisation Directions Vertical and Horizontal
VSWR 1.5:1
Polarisation Dual Linear
Rx Sensitivity -94 dBm
Transmit Power 251 mW
Wireless Standards 802.11a/n
Band 5 GHz
Frequency Min 5170 MHz
Frequency Max 5875 MHz

The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.
Regional regulations must be observed when deploying radio equipment. More info

Power Input

PoE Ports 1
PoE Min 18 V
PoE Max 26 V
PoE Pins 4/5(+),7/8(-)
PoE Type Passive
Power Consumption 8 W
Current Min 0.5 A

Physical

Mounting Pole
Mechanical Downtilt Min -20 °
Mechanical Downtilt Max 20 °
Dimensions 459 x 459 x 261 mm
Weight 3220 g
Case Material Plastic

Environmental

Operating Humidity Min 5 % RH
Operating Temperature -40 to 70 °c
ESD/EMP Protection ± 24kV Air / Contact
Operating Humidity Type NonCondensing
Wind Survial 200 Km‾h
Wind Loading 390N @ 200km/h N @ Km‾h
UV Resistant IEC 68-2-5 at 40° C and ETS 300 019-1-4
Operating Humidity Max 95 % RH

Compliance

RoHS Yes
Certifications RCM, FCC, IC and CE