FREE DELIVERY ON ORDERS OVER £75!*
View Basket
0 items
Basket Total: £ 0.00

RADWIN MultiSector Dual Carrier 1.5Gbps Base Station with Support for up to 4x External Antenna

RADWIN MultiSector Dual Carrier 1.5Gbps Base Station with Support for up to 4x External Antenna

RADWIN MultiSector Dual Carrier 1.5Gbps Base Station with Support for up to 4x External Antenna
RADWIN MultiSector Dual Carrier 1.5Gbps Base Station with Support for up to 4x External Antenna
Manufacturer:
Radwin
MPN:
RW-5BG5-2454
Order Code:
RW-5BG5-2454
Quick Code:
#2129
Call us for stock information
Radwin

Product Details

1.5Gbps Base Station Supporting Multiple External Antennas

RADWIN’s RW-5BG5-2454 is a MultiSector Connectorized dual carrier base station supporting up to 4 external sector antennas. The self-contained base station notably reduces site complexity and TCO while enabling deployment flexibility through the mix and match of different antennas for best performance per deployment use case.

The MultiSector solution is perfect for network operators planning to deploy multiple base station sites with varied sector sizes and coverage, as typically required in rural connectivity, safe city and oil & gas applications.

RADWIN MultiSector Connectorized

The MultiSector dual carrier base station delivers up to 1.5Gbps and enables connectivity of up to four MIMO 2x2 antennas, two antennas per carrier of 750Mbps. The self-contained base station includes a built-in layer-2 Switch that aggregates the dual carrier traffic and internal GPS antenna to significantly reduce mutual interference with local or remote networks.

The MultiSector base station can cover 4 sectors with only 2 frequencies. Each of the radio carrier resources are split between 2 antennas in the time domain, avoiding signal power loss when using an RF splitter. The output from one MultiSector antenna can be configured as self-backhaul to carry traffic from all other antennas to the hub site, eliminating the need for a Point-to-Point (PtP) radio.

The unit is fed through a single PoE and can be connected to the WAN over SFP.

Please note:
This item comes without PoE injectors and must be bought seperately if you are not using them with a PoE Switch.
Please refer to product Accessories for recommended PoE power supplies.

The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.
Regional regulations must be observed when deploying radio equipment. More info

Resources

Datasheet

Accessories

RADWIN IDU-S Carrier Class Indoor PoE Switch

RADWIN IDU-S Carrier Class Indoor PoE Switch

MPN:
RW-7401-6006
Order Code:
RW-7401-6006
QuickCode:
#2131