Tycon Power 24v-48v DC To DC Gigabit POE
Tycon Power 24v-48v DC To DC Gigabit POE
Product Details
The Tycon Power 48v-56V DC To DC Converter for airFiber is a low cost and high efficiency solution for converting to a IEEE802.3af and IEEE802.3at Power Over Ethernet from a 12VDC or 24VDC or 48VDC voltage source like a battery system or UPS. They have an integrated POE injector to apply the 802.3af or 802.3at output to the CAT5 Ethernet cable. The output voltage is regulated 48VDC-56VDC. They have two isolated inputs for connecting 2 power sources, e.g. a primary and backup power source.
They accept gigabit data-in to a shielded RJ45 Jack and provide gigabit data-out and POE power on the shielded RJ45 output jack. They work by supplying power on the unused Ethernet pins 4,5(V+) and 7,8(V-). They have various protections for surge, short circuit and overload. The units have power outputs up to 35W.
Package Contents
- 1x Tycon Power 24v-48V DC To DC Gigabit POE
Product Features
- Input Voltage 12VDC or 24VDC or 48VDC
- IEEE 802.3af/at compliant POE output
- Dual Inputs for connecting 2 power sources
Product Specifications
Networking
10/100/1000 | 1 |
10/100/1000 PoE Out | 1 |
Power
Ripple | 1 % |
Load Regulation | 5 % |
Min Efficiency | 75 % |
Power Consumption | 1 W |
Noise | 1 % |
Line Regulation | 1 % |
Power Input
Connector | Removeable Screw Type Compression Wire Terminal (12 AWG Max) |
DC Min | 18 V |
DC Max | 36 V |
Power Output
PoE Type | 802.3af and 802.3at |
PoE Pins | 4/5(+),7/8(-) |
Max Power | 35 W |
Current | 0.6255 A |
Voltage Max | 56 V |
Physical
Dimensions | 38 x 75 x 125 mm |
Weight | 300 g |
Environmental
Operating Humidity Min | 5 % RH |
Operating Humidity Max | 90 % RH |
Operating Temperature | 60 to -30 °c |
Storage Temperature | -40 to 80 °c |
Compliance
Certifications | CSA 22.2 &TUV EN60950, UL1950, FCC Class B and EN55022 Class B |