Tycon Power PoE/Solar 24v/24v Input Charger Controller
Tycon Power PoE/Solar 24v/24v Input Charger Controller (Dual Polarity)
This item is not currently available.
Please contact us for information or alternatives, we are here to help.
Tycon Power Systems POE/Solar charge controllers have dual inputs to charge batteries from a POE source and also from a secondary source such as solar panels in order to provide redundancy and ensure 100% uptime for critical applications. The solar input can handle up to 8A, the POE input up to 2.6A.
The built-in POE inserter delivers 24V 1A at the POE out port and has a secondary wire terminal 24V 1.5A output.
There is full electronic protection for short circuit, reverse current, overvoltage, overcharge and over discharge.
The built-in over discharge protection and low self consumption ensure the battery is not over-discharged, which greatly increases the life of the batteries.
Five LED indicators give provide visual indication that current is being supplied by a POE source or solar panel, if the battery is charging, if load output is turned on and provides a warning if the battery is connected with polarity reversed.
Solar and Battery Connections are via 4 wire terminals for wire size up to 10AWG. POE Input and Output is via 2 RJ45 shielded connectors.
The controllers are externally fused with a standard replaceable fuse.
- 2x DIN Rail Clip
- 1x Installation CD
- 1x Tycon Power PoE/Solar 24v/24v Dual Input Charger Controller
- Dual Input - Charges 24V Batteries from Solar Panel and / or Passive POE
- Supports up to 60W Device Load
- Regulated Output Voltage
|Solar Current||8000 mA|
|Maintenance Voltage||27.3 V|
|PoE Min||36 V|
|Solar Min||24 V|
|Solar Max||36 V|
|PoE Max||57 V|
|PoE Current||2600 mA|
|Battery Max||24 V|
|Max Current||1500 mA|
|DC Connector||Dc Jack|
|DC Max||25 V|
|Max PoE Current||1000 mA|
|DC Min||20 V|
|PoE Max||24 V|
|Dimensions||40 x 118 x 159 mm|
|Operating Temperature||60 to -30 °c|