Tycon Power Battmeter Qwikview Station Monitor
Tycon Power Battmeter Qwikview Station Monitor (Analog Voltmeter Current Meter)
The Tycon Power-BATTMETER-24 is a simple very low cost meter system used for quickly assessing the battery charge status and charge rate on any 12V or 24V battery system. With just a glance it can be determined if the battery is charging or discharging and the state of the batteries' charge by observing the battery voltage.
On solar systems the BATTMETER-24 shows if the solar panels are charging the batteries and how quickly, based on the current reading. On wind-powered systems he BATTMETER-24 shows if the wind turbine is outputting sufficient power to charge the batteries. On vehicular applications, motorhomes, camper vans and cabin applications the owner can quickly monitor the state of auxiliary battery charge and how fast the battery is charging or discharging. This type of information is imperative to maintain a healthy battery system and extend the life of the batteries.
Because of its analogue meter design there is virtually no extra power required to run the BATTMETER so it will not drain precious battery resources like some digital meters. The rugged metal enclosure comes with DIN Rail mounts for a particularly clean and easy install using DIN Rail mounting. The enclosure can also be wall mounted.
- 2x DIN Rail Clips
- 1x Screw Set
- 1x Tycon Power Battmeter QwikView Station Monitor
- Assesses 12/24V Battery Systems
- 9x Wire Terminal Connections
|Current Max||20 A|
|Voltage Max||30 V|
|Current Min||0.25 A|
|Case Material||Powder Coated Steel|
|Max Wire Size||12 AWG|
|Dimensions||33 x 102 x 127 mm|
|Operating Temperature||-40 to 85 °c|
|Operating Humidity Max||85 % RH|
|Current Measurement Max||20 A|
|Current Measurement Min||-20 A|