Ubiquiti Ethernet Surge Protector Gen2
Ubiquiti Ethernet Surge Protector Gen2
Product Details
The Ubiquiti Ethernet Surge Protector (ETH-SP) is engineered to protect any Power-over-Ethernet (PoE) or non-PoE device with connection speeds of up to 1 Gbps. Damaging electrostatic discharge attacks and surges are diverted to the ETH-SP and safely discharged into the ground, so network devices are protected.
All Ubiquiti AirMax devices are equipped with built-in ESD protection, so the ETH-SP adds another layer of protection to your outdoor, high-speed network and helps meet local code requirements.
Please note: this product does not include a drain wire (optional), pole or wall mounting kit. Pole mounting can be achieved with a jubilee clip or similar and wall mounting requires 2 screws (with screw head ≤ 5mm).
Package Contents
- 1x Screw Set
- 1x Ubiquiti Ethernet Surge Protector
Product Specifications
General
Discharge Current Normal | 0.5 KA |
Max Inpulse Spark Over-Voltage | 700V @ 1kV/?s V |
Application | Surge Protector |
Max Insulation Resistance | 1G? @ 50V G Ω @ V |
Max Capacitance | 1.0 pF @ 1 MHz pF @ MHz |
DC Spark-Over Voltage | 90V @ 100V/s V @ V ‾ s |
Discharge Current Max | 5 KA |
Compatiable Cable | RJ45 |
Max Surge Discharge Current | 5000 kA |
Voltage Max | 48 V |
Connector | RJ45 jacks |
Physical
Dimensions | 61 x 91 x 32.5 mm |
Colour | White |
Weight | 80 g |
Environmental
Humidity Type | Non-condensing |
Operating Temperature | 65 to -30 °c |
ESD/EMP Protection | Yes |
Operating Humidity Min | 10 % RH |
Operating Humidity Max | 90 % RH |
Related Products

Ubiquiti Universal Arm Bracket

Ubiquiti UniFi Switch 24 Port Managed Gigabit Ethernet Switch (No PoE)

Ubiquiti EdgeRouter X SFP 5 Port

Ubiquiti airCube ISP 802.11n WiFi Router with PoE Passthrough

Ubiquiti NanoBeam AC Gen 2 Dual Port 5GHz 19dBi Radio and Antenna

Ubiquiti Nanoswitch

Ubiquiti EdgeRouter Rackmount Kit
