Ubiquiti AirFiber 2X 2.4GHz Connectorised Radio - PtP Kit
Ubiquiti AirFiber 2X 2.4GHz Connectorised Radio - PtP Kit
Product Details
The Ubiquiti airFiber AF-2X is a connectorised 2.4GHz variant of the airFiber platform designed for long-range, Point-to-Point (PtP) backhaul links. It features the highest TDD throughput available and proprietary HDD for ultra-low latency. Ubiquiti’s INVICTUS custom silicon and proprietary radio architecture are designed specifically for long-distance, outdoor wireless applications. The compact form factor allows the AF-2X to be used with the new airFiber Slant 45 antennas.
The Ubiquiti airFiber 2X delivers up to 500+ Mbps real throughput and 200+ km range. Channel width flexibility allows TX and RX channel frequencies to be independently configured and placed anywhere within the radio band to avoid local interference. Uplink and downlink also have the ability to programmed with different duty cycles to support asymmetric traffic requirements.
The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.
Regional regulations must be observed when deploying radio equipment. More info
Package Contents
- 2x Metal Straps
- 2x PoE Injecter Mouting Bracket
- 2x GPS Antenna Mount
- 4x Cable Ties
- 2x PoE Injector
- 2x GPS Antenna
- 2x Ubiquiti AirFiber 2X - 2.4GHz
- 2x UK Mains Cable
Product Specifications
System
| Processor Cores | 1 |
| Operating System | AirOS |
| Router Throughput 2.4GHz | 525 Mbps |
| Extras | GPS Antenna and Reset Button |
Networking
| 10/100/1000 PoE In | 1 |
| 10/100 | 1 |
Wireless
| Transmit Power | 1000 mW |
| Channel Width | 56, 28, 20, 40, 50, 14, 30, 10, 7, 5 and 3.5 MHz |
| Modulations | 256QAM MIMO, 1/2 Rate QPSK Xrt, QPSK MIMO, 16QAM MIMO and 64QAM MIMO |
| Duplex | Half |
| Rx Sensitivity | -90 dBm |
| RF Connectors | SMA Jack and SMA RP Jack |
| Frequency Max | 2500 MHz |
| Frequency Min | 2400 MHz |
The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.
Regional regulations must be observed when deploying radio equipment. More info
Power Input
| PoE Max | 19 V |
| PoE Min | 19 V |
| PoE Ports | 1 |
| Power Consumption | 12 W |
| PoE Pins | 1/2/4/5+,7/8/3/6- |
| Current Min | 1 A |
| PoE Type | Passive |
Physical
| Mounting | Magnetic Material and Pole |
| Dimensions | 224 x 82 x 48 mm |
| Weight | 350 g |
| Case Material | Plastic |
Environmental
| Operating Temperature | -40 to 55 °c |
Compliance
| RoHS | Yes |
| Certifications | RCM, FCC, IC and CE |
Related Products
Ubiquiti PowerBeam 5AC Gen 2 25dBi airMax Bridge with 400mm Dish (5 Pack)
Ubiquiti NanoStation Loco 5AC 5GHz 13dBi CPE
Ubiquiti NanoStation Loco M2 2.4GHz 8.5dBi CPE
Ubiquiti NanoBeam AC Gen 2 Dual Port 5GHz 19dBi Radio and Antenna
Ubiquiti Ethernet Surge Protector Gen2
Ubiquiti Tough Cable RJ45 Plug (Each)
Ubiquiti Tough Cable RJ45 Plug with Ground Wire - 20 Box
Ubiquiti Tough Cable Pro - Outdoor Cat5e - 305m
Training Notice
Following the new Government advice issued on 22/09/2020, we’ve made the difficult decision to postpone all our training courses. We will review the current Government advice in June 2021 and if possible, we will advise new training course dates.
Change of Bank Details
From May 4th, MS Distribution's bank details will change. Customers will receive an email with our new details in advance of this date.
Recently Viewed Items
Ubiquiti AirFiber 2X 2.4GHz Connectorised Radio - PtP Kit
Register for a Trade Account
Get access to a range of exclusive trade benefits✝︎ including:
Trade Discounts
Credit Accounts
Large UK Stock
Register Now
UK Distributor
and provider of professional wired and wireless networking products and solutions for:
All trademarks (™), service marks, trade names, product names and logos appearing on the site are the property of their respective owners.