airMAX NanoBeam 5AC
airMAX NanoBeam 5AC
Product Details
High-Performance airMAX ac Bridge
The Ubiquiti NanoBeam AC Gen 2 is a compact 5GHz airMAX CPE. Armed with Ubiquiti's airMax AC technology, the NBE-5AC-Gen2 can support throughput of up to 450+Mbps and offers a range of up to 15+km. This model boasts an improved wide bandwidth antenna for improved noise immunity and better performance in high-noise environments.
The NanoBeam AC Gen 2 features the highest gain for its size. The excellent beam directivity provides the best performance in high-noise environments. Ubiquiti's airMAX® engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.
Simple, Powerful Management
The NanoBeam AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device with the UNMS App. The NBE-5AC-GEN2 runs airOS 8 which rovides powerful features, including airMAX® ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.
Network operators can also use Ubiquiti’s Network Management System (UNMS) to configure, monitor, upgrade, and back up their entire networks, from their core routers to clients’ APs.
The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.
Regional regulations must be observed when deploying radio equipment. More info
Package Contents
- 1x Mains Cable
- 1x Quick Start Guide
- 1x PoE Injector
- 1x NanoBeam Radio
- 1x Bolt Joint Mount
- 1x Metal Strap
- 1x Lock Ring
Product Features
- Dual Gigabit Ethernet Ports
- PoE Passthrough
- 2.4GHz Management Radio
Product Specifications
System
Storage Type | FLASH |
LEDs | Power, Signal Strength and Power |
Operating System | AirOS |
Storage | 16 MB |
Processor Speed | 720 MHz |
Memory Type | DDR2 |
Processor Architecture | MIPS 74 Kc |
Memory | 128 MB |
Networking
10/100/1000 PoE Out | 1 |
10/100/1000 PoE In | 1 |
Wireless
Channel Width | 40, 20, 10, 60 and 80 MHz |
Gain | 19 and 19 dBi |
Frequency Min 2 | 2412 MHz |
Frequency Max | 5875 MHz |
Wireless Standards | airMax AC |
Band | 5 GHz |
Radios | 5GHz, 2.4GHz Management, 2.4GHz Management and 5GHz |
Frequency Min | 5150 MHz |
Frequency Max 2 | 2472 MHz |
Polarisation | Dual-Linear |
VSWR | 1.5:1 |
The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.
Regional regulations must be observed when deploying radio equipment. More info
Power Input
Power Method | Power over Ethernet |
PoE Pins | 4/5+,7/8- |
PoE Max | 24 V |
24 V | |
PoE Ports | 1 |
PoE Type | Passive |
Environmental
Operating Humidity Min | 5 % RH |
Operating Temperature | -40 to 80 °c |
Wind Loading | 45.4 N @ 200 km/h N @ Km‾h |
Wind Survial | 200 Km‾h |
ESD/EMP Protection | ± 24kV Contact/Air |
Operating Humidity Max | 95 % RH |
Operating Humidity Type | Noncondensing |
Physical
Mounting | Pole and Wall |
Dimensions | 189 x 189 x 125 mm |
Weight | 530 g |
530 g | |
Case Material | Outdoor UV Stabilised Plastic |
Compliance
Certifications | MIL-STD-810 G Method 506.5, CE, IC, ETS 300 019-1-4, FCC, IEC 68-2-6, IEC 68-2-11, MIL-STD-810 G Method 509.5, IEC 68-2-14 and IEC 68-2-5 at 40& C |
RoHS | Yes |
Accessories

Ubiquiti IsoBeam - RF Isolation Shield for NBE-M2-13, NBE-M5-19 & NBE-5AC-19

Quick-Mount
Related Products

airMAX PowerBeam 5AC

airMAX NanoStation 5AC Loco

airMAX PowerBeam 5AC (5 Pack)

airMAX Rocket Prism 5AC

UISP Cable Professional

U6 Long-Range

Ubiquiti 50v 1200mA Gigabit PoE Injector
