Product Details

The PBE-5AC-ISO-Gen2 from Ubiquiti is an update to the popular PBE-5AC-ISO bridge radio. The device comes with a dedicated WiFi radio for easy setup and installation and by utilising Ubiquiti's InnerFeed technology offers near lossless performance.

Ubiquiti's PBE-5AC-ISO-Gen2 offers a rear housing with a metal-plated interior, designed to enhance RF shielding. Additionally, an included protective radome shields the PowerBeam 5AC ISO Gen 2 from nature's harshest elements.

The integrated isolator design spatially filters out interference, so the PBE-5AC-ISO-Gen2 delivers improved noise immunity in co-location deployments.

The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.
Regional regulations must be observed when deploying radio equipment. More info

Package Contents

1x Reflector Dish
1x Radome
1x Antenna Feed
1x Rear Housing
1x Mounting Bracket
1x Adjustment Bracket
4x Hex Bolt and Washer
2x Pole Clamp
4x Carriage Bolt
4x Flange Nut
4x Screw with Washer
4x Washer
4x Nylon Insert Lock Nut
1x PoE Injector
1x Mains Power Lead
1x Quick Start Guide

Product Features

Innovative Mechanical Design
Superior RF Isolation
Dedicated WiFi Management Radio

Product Specifications

System

LEDs	Power, Ethernet and Signal Strength
Operating System	AirOS
Storage Type	Flash
Memory Type	DDR2
Processor Speed	560 MHz
Processor Architecture	MIPS 74Kc
Memory	64 MB
Router Throughput 5GHz	450 Mbps

Networking

10/100/1000 PoE In

1

Wireless

Channel Width	40, 30, 50, 80, 20, 10 and 60 MHz
Antenna Type	Dish
Wireless Standards	802.11ac
Band	5 GHz
Frequency Min	5150 MHz
Frequency Max	5875 MHz
Gain	25 dBi
Rx Sensitivity	-96 dBm
Polarisation	Dual Linear

The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.
Regional regulations must be observed when deploying radio equipment. More info

Power Input

PoE Type	Passive
PoE Pins	4/5(+),7/8(-)
PoE Max	26 V
PoE Min	20 V
Power Consumption	8.5 W
Current Min	0.5 A

Physical

Weight	3220 g
Dimensions	261 x 459 x 459 mm
Mechanical Downtilt Min	-20 °
Case Material	Plastic
Mechanical Downtilt Max	20 °
Mounting	Pole

Environmental

Operating Humidity Min	5 % RH
Operating Temperature	-40 to 70 °c
Shock and Vibration	IEC 68-2-6
Wind Loading	559N @ 200km/h N @ Km‾h
Wind Survial	200 Km‾h
ESD/EMP Protection	± 24kV Air / Contact
Operating Humidity Type	NonCondensing
UV Resistant	Yes
Operating Humidity Max	95 % RH