Ubiquiti AirMax RocketDish 5GHz 31dBi 2x2 AC Antenna
Ubiquiti AirMax RocketDish 5GHz 31dBi 2x2 AC Antenna (Dual Polarity)
The Ubiquiti RocketDish RD-5G31-AC is a Carrier Class 2x2 Bridge Dish Antenna that was designed to seamlessly integrate with Ubiquiti Rocket radios. The Ubiquiti Research and Development team engineered the RocketDish 5G31 AC with high isolation and Front-to-Back (F/B) ratio, resulting in improved Signal-to-Noise Ratio. The improved F/B ratio and lower sidelobes reduce the interference from other transmitters in the area or even on the same tower. The improved S/N ratio also allows a higher-order modulation to be used, for example, 256QAM rather than 16QAM. This in turn increases the number of bits per second for a fixed bandwidth.
Because of its advanced engineering, the RocketDish RD-5G31-AC provides:
Unlike standard Wi-Fi protocol, Ubiquitis Time Division Multiple Access (TDMA) AirMax protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller. This time slot method eliminates hidden node collisions and maximizes airtime efficiency. It provides many magnitudes of performance improvements in latency, throughput, and scalability compared to all other outdoor systems in its class. Intelligent QoS Priority is given to voice/video for seamless streaming. Scalability High capacity and scalability. Long Distance Capable of high-speed, carrier-class links.
- 1x Protective Shroud
- 2x RF Cables
- 1x Bolt Set
- 1x Mounting Bracket
- 1x Elevation Rod
- 1x Dish Antenna with Radome
- 2x Pole Clamps
- 2x Stabilizer Brackets
- Built-In Radome
- High Isolation and F/B Ratio
- Ruggedized Mounting
|Frequency Min 2||5100 MHz|
|Frequency Max 2||5800 MHz|
|Dimensions||349 x 748 x 748 mm|
|Wind Loading||1028N @ 201km/h N @ Km‾h|
|Wind Survial||201 Km‾h|
These polar diagrams are a guideline only. For detailed polar diagrams please refer to official manufacturer datasheets.