Ubiquiti NanoBeam M2 2.4GHz 13dBi Radio and Antenna
Ubiquiti NanoBeam M2 2.4GHz 13dBi Radio and Antenna (24v PoE Dual Polarity)
Product Details
The new Ubiquiti NanoBeam M2 13dBi has a compact design with uniform beam width, efficient footprint and a faster processor. The NanoBeam can be easily mounted in a variety of ways thanks to the innovative mechanical design. The Ubiquiti NanoBeam directs RF energy into a tighter beamwidth resulting with the focus in one direction so the NanoBeam blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.
This model of the NanoBeam (NBE-2G-13) features the All-in-One Design. The Ubiquiti Research and Development team combined the radio and antenna to create a more efficient and compact CPE. The NanoBeam gets maximum gain out of the smallest footprint. By providing increased performance with its faster processor and innovative mechanical design at a low cost, the NanoBeam is extremely versatile and cost-effective to deploy.
Innovative Mechanical Design | Compact Form Factor |
All-in-one design - The NanoBeam provides both the radio and antenna in the smallest possible footprint. Quick and easy installation - No fasteners are required for pole-mounting, and a single wall fastener (not included) is required for wall-mounting. Convenient alignment - The NanoBeam pivots on its ball joint for easy aiming. |
Efficient footprint - The radio and antenna are combined into a single body that takes up minimal space. Versatile mounting - The NanoBeam can be mounted in almost any position needed for line of sight. Aesthetics - The NanoBeam is small enough to blend discreetly into the background at a customer's location. |
The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.
Regional regulations must be observed when deploying radio equipment. More info
Package Contents
- 1x Lock Ring
- 1x Ball Joint Mount
- 1x EU Mains Cable
- 1x PoE Injector
- 1x NanoBeamM2'
- 1x Mounting Strap
- 1x UK Mains Cable
Product Features
- Uniform Beamwidth Improves Noise Immunity
- 560 MHz Processor
- Easy Assembly and Installation
Product Specifications
System
Extras | GPS Antenna and Reset Button |
LEDs | Power, LAN and WAN |
Processor Name | Atheros |
Operating System | AirOS |
Storage Type | Flash |
Processor Speed | 560 MHz |
Storage | 8 MB |
Processor Cores | 1 |
Processor Architecture | MIPS 74K |
Memory | 64 MB |
Memory Type | DDR2 |
Networking
10/100 PoE In | 1 |
Wireless
Channel Width | 30, 20, 40, 8, 5 and 10 MHz |
Transmit Power | 630 mW |
VSWR | 1.7:1 |
Rx Sensitivity | -94 dBm |
Gain | 13 dBi |
Antenna Type | Dish |
Frequency Max | 2475 MHz |
Band | 2.4 GHz |
Wireless Standards | 802.11g/n |
Frequency Min | 2405 MHz |
The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.
Regional regulations must be observed when deploying radio equipment. More info
Power Input
PoE Max | 24 V |
PoE Min | 24 V |
PoE Ports | 1 |
PoE Type | Passive |
PoE Pins | 4/5(+),7/8(-) |
Power Consumption | 6 W |
Current Min | 0.5 A |
Physical
Mounting | Wall |
Case Material | Plastic |
Dimensions | 189 x 189 x 125 mm |
Weight | 530 g |
Environmental
Operating Humidity Min | 5 % RH |
Operating Temperature | -40 to 80 °c |
ESD/EMP Protection | ± 24kV Air / Contact |
Shock and Vibration | IEC 68-2-6 |
Wind Loading | 45.4N @ 200km/h N @ Km‾h |
Operating Humidity Type | NonCondensing |
Operating Humidity Max | 95 % RH |
UV Resistant | Yes |
Compliance
RoHS | Yes |
Certifications | RCM, FCC, IC and CE |
Polar Diagrams

These polar diagrams are a guideline only. For detailed polar diagrams please refer to official manufacturer datasheets.
Accessories
