Ubiquiti PowerBeam M5 25dBi airMAX Bridge with 400mm Dish
Ubiquiti PowerBeam M5 25dBi airMAX Bridge with 400mm Dish (Dual Polarity 24v PoE)
Product Details
The new Ubiquiti PowerBeam M5 25dBi has a compact design with uniform beam width, efficient footprint and a faster processor. The PowerBeam can be easily mounted in a variety of ways thanks to the innovative mechanical design. The Ubiquiti PowerBeam directs RF energy into a tighter beamwidth resulting with the focus in one direction so the PowerBeam blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.
This model of the PowerBeam features the Dish Reflector Design. This leverages Ubiquiti's InnerFeed technology which integrates the radio into the feedhorn of the antenna, so there is no need for any cable, improving performance by eliminating cable losses. By providing increased performance with its faster processor and innovative mechanical design at a low cost, the PowerBeam is extremely versatile and cost-effective to deploy.
The Ubiquiti PowerBeam is also compatible with the RF Armor 5 GHz 12 Ubiquiti NanoBridge Kit.
Quick assembly - The number of fasteners was reduced to simplify assembly. Tools are required only when the technician mounts the PowerBeam on the pole. Easy removal - The antenna feed can be detached with thepush of a button. Dish and brackets - Made of galvanized steel that is powder-coated for superior corrosion resistance. Mounting - Redesigned pole bracket for the 400 mm dish and fender washers for the 300 mm dish prevent paint from being removed from the metal brackets for improved corrosion resistance.
Innovative Mechanical Design
Corrosion Resistance
Built-in mechanical tilt - The mounting bracket conveniently offers 20 of uptilt and up to 20 of downtilt. Fasteners - GEOMET-coated for improved corrosion resistance when compared with zinc-plated fasteners.
The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.
Regional regulations must be observed when deploying radio equipment. More info
Package Contents
- 1x Rear Housing
- 2x Nuts
- 1x PoE Injector
- 1x Pole Clamp
- 1x PBE-M5-400 Antenna Feed
- 1x Dish Reflector
- 1x Dish Bracket
- 1x U-Bolt
- 1x UK Mains cable
Product Features
- Uniform Beamwidth Improves Noise Immunity
- 560 MHz Processor
- Easy Assembly and Installation
Product Specifications
System
| LEDs | Power, LAN and WAN |
| Extras | Reset Ext. and Reset Button |
| Processor Name | Atheros |
| Router Throughput 5GHz | 150 Mbps |
| Operating System | AirOS |
| Processor Architecture | MIPS 74Kc |
| Processor Speed | 560 MHz |
| Storage Type | Flash |
| Processor Cores | 1 |
| Storage | 8 MB |
| Memory | 64 MB |
| Memory Type | DDR2 |
Networking
| 10/100/1000 PoE In | 1 |
Wireless
| Channel Width | 30, 8, 40, 10, 5 and 20 MHz |
| Rx Sensitivity | -96 dBm |
| VSWR | 1.5:1 |
| Polarisation | Dual Linear |
| Transmit Power | 398 mW |
| Gain | 25 dBi |
| Antenna Type | Dish |
| Frequency Max | 5875 MHz |
| Band | 5 GHz |
| Wireless Standards | 802.11a/n |
| Frequency Min | 5170 MHz |
The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.
Regional regulations must be observed when deploying radio equipment. More info
Power Input
| PoE Ports | 1 |
| PoE Min | 24 V |
| PoE Max | 24 V |
| PoE Pins | 4/5(+),7/8(-) |
| PoE Type | Passive |
| Power Consumption | 8 W |
| Current Min | 0.5 A |
Physical
| Mounting | Pole |
| Mechanical Downtilt Min | -20 ° |
| Mechanical Downtilt Max | 20 ° |
| Dimensions | 420 x 420 x 275 mm |
| Case Material | Plastic |
| Weight | 1753 g |
Environmental
| Operating Humidity Min | 5 % RH |
| Operating Temperature | -40 to 70 °c |
| Shock and Vibration | IEC 68-2-6 |
| Wind Survial | 200 Km‾h |
| ESD/EMP Protection | ± 24kV Air / Contact |
| Wind Loading | 342.5N @ 200km/h N @ Km‾h |
| UV Resistant | ETS 300 019-1-4 |
| Operating Humidity Type | NonCondensing |
| Operating Humidity Max | 95 % RH |
Compliance
| RoHS | Yes |
| Certifications | RCM, FCC, IC and CE |
Polar Diagrams
These polar diagrams are a guideline only. For detailed polar diagrams please refer to official manufacturer datasheets.
Related Products
Ubiquiti NanoStation M5 5GHz 16dBi CPE
Ubiquiti Tough Cable Pro - Outdoor Cat5e - 305m
Ubiquiti NanoBeam AC Gen 2 Dual Port 5GHz 19dBi Radio and Antenna
Ubiquiti PowerBeam M5 22dBi airMAX Bridge with 300mm Dish
Ubiquiti NanoBeam M5 5GHz 16dBi Radio and Antenna
Ubiquiti NanoBeam M5 5GHz 19dBi Radio and Antenna
MikroTik RouterBOARD RB951Ui-2HnD Wireless SOHO Access Point
Ubiquiti PowerBeam 5AC Gen 2 25dBi airMax Bridge with 400mm Dish
Delivery Notice
We are currently unable to offer PRE-9:00am delivery on orders placed after Monday 14th September 2020. No timed deliveries are available for the following postcodes LN, PE, NG
Recently Viewed Items
Ubiquiti PowerBeam M5 25dBi airMAX Bridge with 400mm Dish
Register for a Trade Account
Get access to a range of exclusive trade benefits✝︎ including:
Trade Discounts
Credit Accounts
Large UK Stock
Register Now
UK Distributor
and provider of professional wired and wireless networking products and solutions for:
All trademarks (™), service marks, trade names, product names and logos appearing on the site are the property of their respective owners.