AC In-Wall (5 Pack)
AC In-Wall (5 Pack)
Product Details
Ubiquiti UniFi AP IW (5 Pack) - 5 units are included in one compact pack.
Ubiquiti's UniFi AP AC IW (In-Wall) Access Point transforms an Ethernet wall connection into a dual-band 802.11AC WiFi Access Point. The device features two additional Gigabit Ethernet ports, one of which delivers PoE to power and connect an 802.3af device to the network; both ports can be found on the base of the device.
The UniFi AP AC In-Wall AP provides simultaneous, dual-band, 2x2 MIMO technology and offers data rates of up to 867Mbps in the 5GHz frequency. It is powered by 48V passive PoE and also supports 802.3at and provides PoE output at 48V passthrough. The PoE Input port is located on the back of the device.
The back plate offers a variety of mounting holes specifically designed to provide easy installation worldwide.
This is a 5 Pack version of the UniFi AP AC In-Wall, without PoE. UniFi AP AC IW's are available individually.
Please note:
This item comes without PoE injectors and must be bought seperately if you are not using them with a PoE Switch.
Please refer to product Accessories for recommended PoE power supplies.
The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.
Regional regulations must be observed when deploying radio equipment. More info
Package Contents
- 5x Ubiquiti UAP-AC-IW Access Points
- 5x Cover Plate
- 5x Back Plate
- 20x Wall Mount Screw
- 10x Security Torx Screw
- 10x Phillips Screw
- 1x Quick Start Quide
Product Features
- 2x Secondary Ethernet Ports
- 2x2 MIMO
- PoE Passthrough
Product Specifications
System
Max Power Output | 20 dBm |
Max BSSID | 8 |
Concurrent Clients | 250 |
Extras | Reset Button |
Security | WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) and WEP |
Operating System | UniFi |
Router Throughput 5GHz | 867 Mbps |
Router Throughput 2.4GHz | 300 Mbps |
Software
WMM | Video, Background, Voice and Best Effort |
VLAN | 802.1Q |
Guest Traffic Isolation | Yes |
QoS | Per-User Rate Limiting |
Networking
10/100/1000 PoE In | 1 |
10/100/1000 | 1 |
10/100/1000 PoE Out | 1 |
Wireless
Band | 2.4 and 5 GHz |
Antenna Type | Dual-Band Single Polarity |
Wireless Standards | 802.11a/b/g/n/ac |
MIMO | 2GHz: 2x2 Mimo and 5.8GHz: 2x2 MIMO |
Gain 2 | 2 dBi |
Gain | 1 dBi |
The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.
Regional regulations must be observed when deploying radio equipment. More info
Power Input
Power Method | Power over Ethernet |
PoE Type | 802.3at |
Power Consumption | 19 W |
PoE Ports | 1 |
Power Output
PoE Port | 2 |
PoE Pins | 1/2+; 3/6- |
PoE Max | 48 V |
PoE Type | Passive |
Environmental
Operating Temperature | -10 to 50 °c |
Operating Humidity Min | 5 % RH |
Operating Humidity Type | Noncondensing |
Operating Humidity Max | 95 % RH |
Physical
Weight | 200 g |
Mounting | 1-Gang Electrical Wall Box |
Dimensions | 139.7 x 86.7 x 25.75 mm |
Compliance
Certifications | IC, CE and FCC |
Accessories

8 PoE (Gen1)

CAT5e RJ45 UTP Patch Cable - 3m WHITE

CAT5e RJ45 UTP Patch Cable - 2m WHITE

CAT5e RJ45 UTP Patch Cable - 1m WHITE
