Ubiquiti UniFi Flex 5-Port PoE Switch
Ubiquiti UniFi Flex 5-Port PoE Switch (802.3bt In 802.3af Out Layer 2)
The USW-Flex from Ubiquiti is a Gigabit managed Layer 2 switch with an 802.3bt PoE++ input port and 4 auto-sensing 802.3af PoE output ports. The USW-Flex is capable of a maximum PoE budget of 46W but requires a 50V 60W / 802.3bt input to fully utilise it..
Use the included mounting kit to mount the USW-Flex on a pole or mount, or attach the wall mount to the rear panel and hang the switch on a magnetic surface. The switch is IP55-rated and can be installed both indoors and outdoors.
Power the UniFi Range
Use the USW-Flex to power a range of products from Ubiquiti's UniFi range, including the UVC-G4-PRO camera and the UAP-AC-M mesh access point.
Full Performance with 802.3bt
In order to utilise the full power budget of the USW-FLEX, an 802.3bt or 50V 60W passive PoE input is required. The 50V 60W Passive PoE Injector from Ubiquiti is the recommended injector for this device.
This item comes without PoE injectors and must be bought seperately if you are not using them with a PoE Switch.
Please refer to product Accessories for recommended PoE power supplies.
- 1x UniFi Switch Flex
- 1x Wall Mount
- 1x Pole Mount
- 1x Port Cover
- 2x Mounting Screws
- 2x Screw Anchors
- 2x Zip Ties
- Versatile Mounting Options
- Auto-Sensing 802.3af PoE
- Layer 2 Switching
|LEDs||PoE, System Status, Port Speed, Port Link and Port Activity|
|10/100/1000 PoE In||1|
|10/100/1000 PoE Out||4|
|Power Consumption Excluding PoE||5 W|
|PoE Max||57 V|
|PoE Min||50 V|
|PoE Budget||46 W|
|Dimensions||122.5 x 107.1 x 28 mm|
|Operating Temperature||-40 to 55 °c|
|Operating Humidity Max||95 % RH|
|Operating Humidity Min||5 % RH|
|Operating Humidity Type||Noncondensing|