End-to-end support services for your networking needs
View Basket
0 items
Basket Total: £ 0.00

Ubiquiti AirFiber 5U High Band 5/6 GHz PtP Link

Ubiquiti AirFiber 5U High Band 5/6 GHz PtP Link (100Km 2x2 MIMO)

Ubiquiti AirFiber 5U High Band 5/6 GHz PtP Link
Ubiquiti AirFiber 5U High Band 5/6 GHz PtP Link
Manufacturer:
Ubiquiti Inc.
MPN:
AF-5U-PTP
Order Code:
AIRFIBER5U-PTP
Quick Code:
#1347
£1,894.08 ex. VAT
(£2,272.90 inc. VAT)
Call us for stock information
Ubiquiti Inc.

Product Details

The new airFiber 5u is a truly revolutionary Point-to-Point wireless platform from Ubiquiti Networks. Housed in a compact, highly efficient form factor, airFiber delivers amazing wireless gigabit performance, low latency, and long range. The Ubiquiti airFiber ushers in a new era in price-disruptive wireless technology ideal for carrier backhaul, building-to-building enterprise use, or public safety applications.

The Ubiquiti airFiber 5u features a dual-independent, 2x2 MIMO, high-gain reflector antenna system. Separate transmit (TX) and receive (RX) antennas help extend link budgets by eliminating the extra RF losses caused by the switches or duplexers required in systems with common TX/RX antennas. Each airFiber radio has two complete antenna systems and a mechanical back-plane that are constructed as a one-piece monocoque moulding - a radical departure from industry practice. Monocoque means that the exterior skin supports the structural load of airFiber hardware. Due to its single-piece, injection-moulded architecture, airFiber adds both low weight and low cost to its list of advantages.

Introduced on the airFiber 5u, the Radio Alignment Display (RAD) makes aiming quicker and easier. The dual, calibrated signal strength indicators display the actual signal strength on the local and remote airFiber radios in real time. In addition to this Ubiquiti make installing the airFiber 5 even easier, the unique sliding-clamp design of airFiber 5 allows mounting hardware to be pre-assembled prior to installationnomore dropped screws at the top of the tower. As an added convenience, the drop-in cradle mount design allows the installer to attach mounting hardware to the pole without having to support the weight of the airFiber radio during installation.

The high-band model, AF5U, can use the less congested, 5.9 and 6 GHz bands (as permitted by local country regulations) and has robust filtering to enable co-location with devices operating in the lower 5 GHz bands.

The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.
Regional regulations must be observed when deploying radio equipment. More info

Package Contents

  • 4x Azimuth Support Brackets
  • 2x Bolt Sets
  • 1x Lower Mount
  • 3x Pole Clamps
  • 2x I-Bracket
  • 2x PoE Injector
  • 2x EU Mains Cables
  • 4x Cable Ties
  • 2x Ubiquiti AirFiber 5U
  • 2x UK Mains Cable
  • 2x Upper Mount Bracket with Elevation rod

Product Features

  • Passive PoE Input
  • 2X2 MIMO
  • Long-Range Links

Product Specifications

System

LEDs Link Status, Master/Slave, Remote and Local Displays (Calibrated Signal Status), GPS Synchronization, Modulation Mode 0.25x to 4x, 6x, 8x, 10x (Unlabeled), Overload, Status LEDs: Data Port Link/Activity, Management Port Speed, Data Port Speed and Management Port Link/Activity
Operating System AirOS
Extras Reset Button and GPS Clock Synchronization

Networking

10/100/1000 PoE In 1
10/100 1

Wireless

Modulations 64QAM MIMO, 1/4 QPSK SISO, QPSK SISO, QPSK MIMO and 16QAM MIMO
Cross Polarisation 28 dB
Beamwidth Horizontal 6 °
Polarisation Dual-Slant
Beamwidth Vertical 6 °
Duplex Full (Channel Width Restrictions Apply) and Half
Front to Back Ratio 70 dB
Gain 23 dBi
Antenna Type Dish
Band 5 GHz
Frequency Min 5725 MHz
Frequency Max 5850 MHz
Channel Width 100 MHz

The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.
Regional regulations must be observed when deploying radio equipment. More info

Power Input

PoE Min 50 V
PoE Max 50 V
PoE Ports 1
Current Min 1.2 A
PoE Type Passive
Power Consumption 40 W

Physical

Mounting Pole
Weight 1600 g
Dimensions 281.4 x 468.4 x 938.4 mm

Environmental

Operating Temperature -40 to 55 °c
Wind Loading 863N @ 200km/h N @ Km‾h
Wind Survial 200 Km‾h

Compliance

RoHS Yes
Certifications IC, FCC, CE and RCM