Ubiquiti PowerBeam AC 25dBi ISO airMAX Bridge with 400mm Dish
Ubiquiti PowerBeam AC 25dBi ISO airMAX Bridge with 400mm Dish (Dual Polarity 24v PoE)
Product Details
The Ubiquiti PowerBeam AC 25dBi ISO is an AirMax ac Bridge with a 400mm dish that is ideal for deployments requiring maximum performance and RF isolation.
The Ubiquiti PowerBeam ac ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference. With its combination of focused beam directivity and RF isolation, the PowerBeam ac ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency. Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna, this improves performance by eliminates cable losses.
AirMax ac devices feature a multi-radio architecture to power a revolutionary RF analytics engine. An independent processor on the PCBA powers a second, dedicated radio, which persistently analyses the full 5 GHz spectrum and every received symbol to provide you with the most advanced RF analytics in the industry. Data from the spectrum analysis and RF performance monitoring is displayed on the Main tab and AirView Spectrum Analyser of AirOS V7.
The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.
Regional regulations must be observed when deploying radio equipment. More info
Package Contents
- 1x Bolt Set
- 1x Adjustment Bracket
- 1x Rear Housing
- 1x Mounting Bracket
- 1x PoE Injector
- 1x Antenna Feed
- 1x Radome
- 1x Pole Clamp
- 1x Reflector
- 1x UK Mains Cable
Product Features
- 25dBi Output Power
- Uniform Beamwidth Maximizes Noise Immunity
- Integrated Isolator Design Improves RF Isolation
Product Specifications
System
LEDs | Power, LAN and WAN |
Extras | GPS Antenna and Reset Button |
Processor Name | Atheros |
Router Throughput 5GHz | 450 Mbps |
Operating System | AirOS |
Processor Architecture | MIPS 74K |
Processor Speed | 560 MHz |
Storage Type | Flash |
Processor Cores | 1 |
Storage | 16 MB |
Memory | 64 MB |
Memory Type | DDR2 |
Networking
10/100 PoE In | 1 |
Wireless
Channel Width | 60, 30, 80, 40, 20, 50 and 10 MHz |
Rx Sensitivity | -96 dBm |
VSWR | 1.5:1 |
Polarisation | Dual Linear |
Transmit Power | 316 mW |
Gain | 25 dBi |
Antenna Type | Dish |
Wireless Standards | 802.11ac |
Band | 5 GHz |
Frequency Min | 5170 MHz |
Frequency Max | 5875 MHz |
The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.
Regional regulations must be observed when deploying radio equipment. More info
Power Input
PoE Ports | 1 |
PoE Min | 20 V |
PoE Max | 26 V |
PoE Pins | 4/5(+),7/8(-) |
PoE Type | Passive |
Power Consumption | 8.5 W |
Current Min | 0.5 A |
Physical
Mounting | Pole |
Mechanical Downtilt Min | -20 ° |
Mechanical Downtilt Max | 20 ° |
Dimensions | 459 x 261 x 459 mm |
Case Material | Plastic |
Weight | 3220 g |
Environmental
Operating Humidity Min | 5 % RH |
Operating Temperature | -40 to 70 °c |
Shock and Vibration | IEC 68-2-6 |
Wind Survial | 200 Km‾h |
ESD/EMP Protection | ± 24kV Air / Contact |
Wind Loading | 559N @ 200km/h N @ Km‾h |
UV Resistant | Yes |
Operating Humidity Type | NonCondensing |
Operating Humidity Max | 95 % RH |
Compliance
RoHS | Yes |
Certifications | RCM, FCC, IC and CE |
Polar Diagrams

These polar diagrams are a guideline only. For detailed polar diagrams please refer to official manufacturer datasheets.
Related Products

airMAX NanoStation 5AC

airMAX NanoStation 5AC Loco

Netonix Rackmount Kit for WS-12-400-AC

IEC Main Cable with 5A Fuse
