Product Details

The Ubiquiti PowerBeam AC 25dBi ISO is an AirMax ac Bridge with a 400mm dish that is ideal for deployments requiring maximum performance and RF isolation.

The Ubiquiti PowerBeam ac ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference. With its combination of focused beam directivity and RF isolation, the PowerBeam ac ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency. Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna, this improves performance by eliminates cable losses.

AirMax ac devices feature a multi-radio architecture to power a revolutionary RF analytics engine. An independent processor on the PCBA powers a second, dedicated radio, which persistently analyses the full 5 GHz spectrum and every received symbol to provide you with the most advanced RF analytics in the industry. Data from the spectrum analysis and RF performance monitoring is displayed on the Main tab and AirView Spectrum Analyser of AirOS V7.

This model features a 400mm dish and outputs a 25dBi.

The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.
Regional regulations must be observed when deploying radio equipment. More info

Package Contents

1x Bolt Set
1x Adjustment Bracket
1x Rear Housing
1x Mounting Bracket
1x PoE Injector
1x Antenna Feed
1x Radome
1x Pole Clamp
1x Reflector
1x UK Mains Cable

Product Features

25dBi Output Power
Uniform Beamwidth Maximizes Noise Immunity
Integrated Isolator Design Improves RF Isolation

Product Specifications

System

LEDs	LAN, Power and WAN
Operating System	AirOS
Processor Name	Atheros
RouterOS Level	7
Extras	Reset Button
Router Throughput 5GHz	450 Mbps
Processor Architecture	MIPS 74Kc
Processor Speed	560 MHz
Storage Type	Flash
Processor Cores	1
Memory	64 MB
Memory Type	DDR2
Storage	16 MB

Networking

10/100/1000 PoE In

1

Wireless

Antenna Type	Dish
Gain	25 dBi
Channel Width	40, 60, 80, 30, 50, 20 and 10 MHz
Polarisation Directions	Vertical and Horizontal
MIMO	MIMO
VSWR	1.5:1
Rx Sensitivity	-96 dBm
Polarisation	Dual Linear
Transmit Power	316 mW
Wireless Standards	802.11ac
Frequency Min	5150 MHz
Band	5 GHz
Frequency Max	5875 MHz

The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.
Regional regulations must be observed when deploying radio equipment. More info

Power Input

PoE Max	26 V
PoE Min	20 V
PoE Ports	1
PoE Type	Passive
PoE Pins	4/5(+),7/8(-)
Current Min	0.5 A
Power Consumption	8.5 W

Physical

Mounting	Pole
Case Material	Plastic
Weight	3220 g
Dimensions	459 x 261 x 459 mm

Environmental

Operating Humidity Min	5 % RH
Operating Temperature	-40 to 70 °c
ESD/EMP Protection	± 24kV Air / Contact
Wind Loading	559N @ 200km/h N @ Km‾h
Wind Survial	200 Km‾h
UV Resistant	IEC 68-2-5 at 40° C and ETS 300 019-1-4
Operating Humidity Type	NonCondensing
Operating Humidity Max	95 % RH