Ubiquiti 50v 1200mA Gigabit PoE Injector
This Gigabit 50v PoE Injector is compatible with Ubiquiti airFibers and other non-802.3af PoE devices, providing efficient power over Ethernet.
Any EU products are supplied with the appropriate UK power method at no extra cost.
Tech Specs
Click here for the Ubiquiti 50v 1200mA Gigabit PoE Injector datasheet.
| Device Specifications | |
|---|---|
| Model | POE-50-60W |
| Dimensions | 101 x 60 x 33 mm (3.98 x 2.36 x 1.30”) |
| Weight | 192 g (6.77 oz) |
| Output voltage | 50VDC @ 1.2A |
| LAN activity indicator | No |
| Gigabit LAN port | Yes |
| Remote reset capability | No |
| Reset button | No |
| Rated voltage | 100—240V AC @ 50/60Hz |
| Input current | 1.3A @ 120V AC, 0.75A @ 230V AC |
| Inrush current | <100A peak @120V AC, <200A peak @ 230V AC |
| Efficiency | 85+% |
| Output ripple | 1% max. |
| Switching frequency | 65 kHz |
| Line regulation | ≤ 3% |
| Load regulation | ≤ 5% |
| 2-pair powering | No |
| 4-pair powering | Pins 1, 2, 4, 5 (+) and 3, 6, 7, 8 (-) |
| AC connector | IEC-320 C6 |
| Data In / PoE | RJ45 shielded socket |
| Surge protection | Difference and common mode |
| Clamping protection | 11V data, 60V power |
| Max. surge discharge | 1500A (8/20 µs) power |
| Peak pulse current | 36A (10/1000 µs) data |
| Shunt capacitance | <5 pF data |
| Response time | <1 ns |
| Ambient operating temperature | 0 to 40° C (32 to 104° F) |
| Storage temperature | -30 to 70°C (-22 to 158° F) |
| Ambient operating humidity | 35 to 90% noncondensing |
| Certifications | CE, FCC, IC, UL |
| NDAA Compliant | Yes |
FAQs
Q: What is the Ubiquiti POE-50-60W used for?
A: The POE-50-60W is a 50V Gigabit PoE injector designed to deliver both power and data to high-power Ubiquiti devices over a single Ethernet cable.
Q: Which devices are compatible with the POE-50-60W?
A: It is compatible with Ubiquiti access points, switches, cameras, and other devices requiring 50V Passive PoE input up to 60W.
Q: Can the POE-50-60W support Gigabit network speeds?
A: Yes, it supports full Gigabit Ethernet data transmission while delivering up to 60W of PoE power.
Q: Is the POE-50-60W suitable for indoor or outdoor use?
A: The injector is intended for indoor deployment near a power source, powering outdoor Ubiquiti devices via standard Ethernet cabling.
Q: How does the POE-50-60W simplify network installations?
A: By combining power and data delivery over a single cable, it reduces cabling complexity and enables easy installation of high-power PoE devices.