Ubiquiti UniFi Hi-Capacity Aggregation Switch
Please contact us for stocking information.
This Layer 3 switch is specifically designed for high-capacity connections and supports both 10G SFP+ and 25G SFP28. It has a total of 32 ports, with 28 dedicated to 10G SFP+ and 4 for 25G SFP28. Additionally, it is equipped with DC power backup capabilities, making it a reliable choice for Layer 3 switching needs.
Tech Specs
Click here for the USW-PRO-AGGREGATION datasheet.
| Device Specifications | |
|---|---|
| Overview | |
| Dimensions | 442 x 325 x 44 mm (17.4 x 12.8 x 1.7") |
| Port Layout | 10G SFP+: 28 (10G/1G) 25G SFP28: 4 (25G/10G/1G) |
| Redundancy | DC Power Backup |
| Layer 3 | ✓ |
| Form Factor | Rack mount (1U) |
| Performance | |
| Switching Capacity | 760 Gbps |
| Total Non-Blocking Throughput | 380 Gbps |
| Forwarding Rate | 565 Mpps |
| Supported VLANs | 1,000 |
| MAC Address Table Size | 32,000 |
| L3 Table Size | ARP Entries: 16,000 IPv4 Routes: 16,000 |
| Packet Buffer Size | 4 MB |
| Access Lists | IPv4: 128 MAC: 128 |
| Layer 3 Features | |
| DHCP Server | Local Networks: ✓ |
| DHCP Relay | ✓ |
| Inter-VLAN Routing | Local Networks: ✓ |
| Static Routing | Local Networks: ✓ |
| Layer 2 Features | |
| LACP Port Aggregation | ✓ |
| STP & RSTP | ✓ |
| QoS (DSCP) | ✓ |
| Pro AV Profiles | Play, Dante, Q-SYS, NDI, SDVoE, Shure, AES67, Crestron: ✓ |
| Advanced IGMP Configuration | Querier, Fast Leave, Router Port: ✓ |
| IGMP Snooping | ✓ |
| 802.1X Control | ✓ |
| MAC-Based ACLs & Device Isolation | ✓ |
| DHCP Snooping & Guarding | ✓ |
| Egress Rate Limit | ✓ |
| Flow Control | ✓ |
| Storm Control | ✓ |
| Multicast & Broadcast Rate Limiting | ✓ |
| MAC Address Blocking | ✓ |
| IP-Based ACLs & Network Isolation | ✓ |
| MAC-Based Port Restriction | ✓ |
| Port Isolation | ✓ |
| Port Mirroring | ✓ |
| Jumbo Frames | ✓ |
| LLDP-MED | ✓ |
| Voice VLAN | ✓ |
| Loop Protection | ✓ |
| Hardware | |
| Max. Power Consumption | 100W |
| Power Method | (1) Universal input, 100—240V AC, 50/60 Hz (1) USP RPS DC input |
| Power Input Method | AC input |
| Power Supply | AC/DC, internal, 100W |
| Supported Voltage Range | 100—240V AC |
| Management | Ethernet, AR |
| Heat Dissipation (Excluding PoE Output) | 341.2 BTU/hr |
| Weight | Without mounting brackets: 4.6 kg (10.1 lb) With mounting brackets: 4.7 kg (10.4 lb) |
| Enclosure Material | SGCC steel |
| Mount Material | SGCC steel |
| Supported Rack Depth | 400~1200 mm (15.7-47.2") |
| LCM Display | 1.3" touchscreen |
| ESD Protection | Air: ± 16kV, contact: ± 12kV |
| Ambient Operating Temperature | -5 to 40° C (23 to 104° F) |
| Ambient Operating Humidity | 10 to 90% noncondensing |
| NDAA Compliant | ✓ |
| Certifications | CE, FCC, IC, Anatel |
| Software | |
| Application Requirements | UniFi Network Version 6.1.25 and later |
FAQs
Q: What is the Ubiquiti USW‑Pro‑Aggregation and what is it designed for?
A: The USW‑Pro‑Aggregation is a fully managed Layer 3 UniFi switch featuring 28 × 10G SFP+ ports and 4 × 25G SFP28 ports. It's designed for high-capacity aggregation in enterprise networks, providing high-speed connectivity and silent operation.
Q: What are the performance specifications of the USW‑Pro‑Aggregation?
A:
-
Switching Capacity: 760 Gbps
-
Non-Blocking Throughput: 380 Gbps
-
Forwarding Rate: 565 Mpps
-
MAC Address Table Size: 32,000 entries
-
Packet Buffer Size: 4 MB
-
Supported VLANs: 1,000
-
Layer 3 Features: ARP Entries: 16,000; IPv4 Routes: 16,000; Access Lists: 128 IPv4, 128 MAC
Q: What are the design features of the USW‑Pro‑Aggregation?
A: The switch features a fanless design for silent operation, a 1.3" touchscreen LCM for status monitoring, and a 1U rackmountable form factor. It weighs 4.6 kg (10.14 lb) without mounting brackets and 4.7 kg (10.36 lb) with brackets.
Q: What are the environmental and compliance specifications?
A:
-
Operating Temperature: -5 to 40°C (23 to 104°F)
-
Operating Humidity: 10–90% non-condensing
-
Certifications: CE, FCC, IC
-
NDAA Compliant: Yes
Q: What software is required to manage the USW‑Pro‑Aggregation?
A: The switch is managed via the UniFi Network Application (version 5.12.11 or later), providing centralized control, monitoring, and configuration.
Resources
Guide: UniFi Network for Retail and Hospitality — MS Dist
Guide: Setting Up a Ubiquiti UniFi Network for a Small Office or Business — MS Dist