The Ubiquiti Wave Nano is a versatile PtMP station that operates at 60 GHz and utilises Wave Technology for optimal performance. With the ability to connect to a Wave AP, it can provide a combined throughput of 2 Gbps (1 Gbps in both directions). Additionally, it features a dependable 5GHz backup radio and a Bluetooth radio for easy setup through the UISP® Mobile app.
Tech Specs
Click here for the Ubiquiti Wave Nano datasheet.
| Device Specifications | |
|---|---|
| Mechanical | |
| Dimensions | Ø256.5 x 113.5 mm (Ø10.1 x 4.5") |
| Weight | Without mount: 932 g (2.1 lb) With mount: 1.2 kg (2.6 lb) |
| Enclosure Material | Aluminum alloy, UV stabilized plastic |
| Mount Material | Aluminum alloy, UV stabilized plastic |
| Pole Mount Diameter | 25 to 63.5 mm (1 to 2.5") on pipe outer diameter |
| Wind Loading | 127 N at 200 km/h (28.6 lbf at 125 mph) |
| Weatherproofing | IPX6 |
| Hardware | |
| Processor | Dual-core ARM® Cortex®-A53 at 1 GHz |
| Memory | DDR3L 512 MB |
| Networking Interface | (1) GbE RJ45 port |
| Max. Power Consumption | 20W |
| Power Method | Passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-) Passive PoE 2-pairs (4, 5+; 7, 8-), for 44–54V DC only |
| Power Supply | 48V DC, 0.65A gigabit PoE adapter (Included) Can be powered by a UISP Router or UISP Switch |
| Supported Voltage Range | 44–54V DC 22–27V DC |
| GPS | Yes |
| Button | Factory reset |
| LEDs | Power, Ethernet, GPS, link |
| Ambient Operating Temperature | -40 to 60° C (-40 to 140° F) |
| Ambient Operating Humidity | 5 to 95% noncondensing |
| Certifications | FCC, IC, CE |
| NDAA Compliant | Yes |
| Software & Network | |
| Operating Mode | PtMP station, PtP* *FW version 3.2.0 and later |
| Ubiquiti Specific Features | Wave AI, discovery protocol |
| Services | UISP, ping watchdog, NTP client, SNMP |
| Tools | Antenna alignment, discovery utility, ping, trace route, speed test, cable test*, site survey*, traffic shaping** *FW version 3.3.0 and later **FW version 3.4.0 and later |
| Network | Bridge/Router* mode *Router is available in PtMP station mode only |
| Application Requirements | UISP: Version 1.4.5 and later |
| Total Throughput | 2 Gbps |
| Max. Range | 5+ km |
| Encryption | WPA2-PSK (AES) |
FAQs
Q1: What is the Ubiquiti Wave-Nano?
A1: The Ubiquiti Wave-Nano is a 60 GHz Point-to-MultiPoint (PtMP) station designed for high-speed wireless connectivity. It offers up to 5 km link range, 2 Gbps total throughput (1 Gbps duplex), and features a 5 GHz backup radio for uninterrupted service.
Q2: What are the key specifications of the Wave-Nano?
A2: Key specifications include:
-
Dimensions: Ø256.5 x 113.5 mm (Ø10.1 x 4.5")
-
Weight: 932 g (2.1 lb) without mount; 1.2 kg (2.6 lb) with mount
-
Processor: Dual-core ARM Cortex-A53 at 1 GHz
-
Memory: 512 MB DDR3L
-
Weatherproofing: IPX6
-
Mounting: Pole mount compatible with 25 to 63.5 mm (1 to 2.5") pipe diameter
-
Software: Managed via UISP mobile app (version 1.4.5 or later)
Q3: What is Wave Technology?
A3: Wave Technology is Ubiquiti's proprietary platform designed to operate in the unlicensed 60 GHz frequency band. It enables high-speed, low-latency wireless communication suitable for Point-to-MultiPoint (PtMP) networks.
Q4: How does the Wave-Nano ensure reliable connectivity?
A4: The Wave-Nano features a 5 GHz backup radio that automatically activates if the primary 60 GHz link experiences interference or failure. Additionally, it includes an integrated GPS antenna for precise synchronization and supports link planning via the ISP Design Center.
Q5: What is the maximum range of the Wave-Nano?
A5: The Wave-Nano supports a maximum link range of up to 5 km in Point-to-MultiPoint (PtMP) mode. With firmware version 3.2.0 or later, it can also operate in Point-to-Point (PtP) mode, extending the range up to 12 km when paired with compatible devices.