Ubiquiti UISP Wave AP Gen2
The Ubiquiti UISP Wave AP Gen2 is a next-generation 60 GHz + 5 GHz multipoint base station, purpose-built for wireless ISPs and fixed wireless access networks. Designed for high-capacity point-to-multipoint deployments, it offers 90° sector coverage, supports up to 31 client connections, and delivers up to 2.7 Gbps symmetrical throughput—making it ideal for bandwidth-heavy services like video streaming, VoIP, and large data transfers.
Equipped with integrated 60 GHz and backup 5 GHz radios, the Wave AP Gen2 maintains reliable connectivity even in challenging weather or obstructed environments. New in this generation are antenna connectors for optional 5 GHz range extension, enhancing performance and flexibility for complex deployment scenarios.
Optimised for dense suburban and urban deployments, this access point is fully managed through the UISP application, providing centralised control, real-time monitoring, and network optimisation tools that scale easily with growing demand.
Tech Specs
View the Ubiquiti UISP Wave AP Gen2 datasheet here.
| Device Specifications | |
|---|---|
| Mechanical | |
| Dimensions | 158.3 x 286.8 x 100.2 mm (6.2 x 11.3 x 3.9") |
| Weight | 1.5 kg (3.3 lb) |
| Enclosure material | UV stabilized polycarbonate, aluminum alloy |
| Pole mount diameter | 25.4 to 60 mm (1 to 2.4") on pipe outer diameter |
| Wind loading | 109.8 N at 200 km/h (25 lbf at 125 mph) |
| Weatherproofing | IPX6 |
| Hardware | |
| Processor | Quad-core ARM® Cortex®-A53 at 1.4 GHz |
| Memory | DDR3L 512 MB |
| Networking interface | (1) 2.5 GbE RJ45 port (1) 10G SFP+ port |
| Max. power consumption | 24W |
| Power method | Passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-) Passive PoE 2-pairs (4, 5+; 7, 8-), for 44–54V DC only |
| Power supply | 48V DC, 0.65A 2.5 GbE PoE adapter (Included) |
| Supported voltage range | 44–54V DC 22–27V DC |
| GPS | Yes |
| Button | Factory reset |
| LEDs | Power, Ethernet, GPS |
| Ambient operating temperature | -40 to 60° C (-40 to 140° F) |
| Ambient operating humidity | 5 to 95% noncondensing |
| Certifications | FCC, IC, CE |
| Software | |
| Operating mode | PtMP access point |
| Ubiquiti specific features | Wave AI, discovery protocol |
| Services | UISP, ping watchdog, NTP client, SNMP |
| Tools | Antenna alignment, discovery utility, ping, trace route, speed test, cable test, site survey |
| Network | Bridge mode |
| Application requirements | UISP: Version 2.4.205 and later |
| System | |
| Total throughput | 5.4 Gbps |
| Supported clients count | 31 |
| Max. range | Connecting to a Wave Pro: up to 6 km Connecting to a Wave Long-Range: up to 6 km Connecting to a Wave Nano: up to 4 km Connecting to a Wave Pico: up to 0.9 km |
| Encryption | WPA2-PSK (AES) |
| RF | |
| Operating frequency* | 57–71 GHz *Depends on regulatory region. |
| Channel bandwidth | 2160, 1080, 540 MHz |
| Operating channels* | 58320, 59400, 60480, 61560, 62640, 63720, 64800, 65880, 66960, 68040, 69120, 70200, 70560 MHz *Depends on regulatory region. |
| Modulation | 16QAM, QPSK |
| Antenna gain | 20 dBi |
| Polarization | Vertically linear |
| Beamwidth | Azimuth: 3 dB 90° Elevation: 3 dB 7° |
| Electrical downtilt | 0° |
| Back-Up RF | |
| WiFi standard | 802.11ax (WiFi 6) |
| Operating frequency* | US/CA Worldwide U-NII-1 5150 - 5250 MHz U-NII-2A 5250 - 5350 MHz U-NII-2C 5470 - 5725 MHz U-NII-3 5725 - 5850 MHz 5150 - 5875 MHz *Depends on regulatory region. |
| Channel bandwidth | 20, 40, 80 MHz |
| Modulation | BPSK (1⁄2), QPSK (1⁄2), QPSK (3⁄4), 16QAM (1⁄2), 16QAM (3⁄4), 64QAM (2⁄3), 64QAM (3⁄4), 64QAM (5⁄6), 256QAM (3⁄4), 256QAM (5⁄6), 1024QAM (3⁄4), 1024QAM (5⁄6) |
| Antenna gain | 13 dBi |
| Cross-pol isolation | 18 dB |
| Polarization | Dual-linear |
| Beamwidth | Azimuth: 6 dB 95° Elevation: 6 dB 25° |
| Electrical downtilt | 0° |
| LEDs | |
| Power | Flashing white: bootup in progress White: not connected to UISP application Blue: connected to UISP application Flashing blue: locate in progress Blue/white: firmware upgrade in progress |
| Ethernet | Flashing white: Ethernet traffic detected Flashing blue: SFP+ traffic detected |
| GPS | Blue: receiving at least (4) GPS satellite signal |
FAQs
Q1: What is the Ubiquiti Wave-AP-Gen2?
A1: The Wave-AP-Gen2 is a high-performance 60 GHz access point designed for point-to-multipoint (PtMP) wireless networking. It delivers ultra-fast and reliable connectivity, making it ideal for urban and high-density environments.
Q2: What throughput and range does the Wave-AP-Gen2 support?
A2: The Wave-AP-Gen2 offers a total throughput of up to 5.4 Gbps. It supports connections up to 6 km when connecting to a Wave Pro or Wave Long-Range device.
Q3: What are the key hardware specifications of the Wave-AP-Gen2?
A3: Key specifications include:
-
Processor: Quad-core ARM Cortex-A53 at 1.4 GHz
-
Memory: 512 MB DDR3L
-
Networking Interfaces: 1 × 2.5 GbE RJ45 port, 1 × 10G SFP+ port
-
Power Consumption: Max 24W
-
Power Method: Passive PoE (44–54V DC)
-
Weatherproofing: IPX6
-
Operating Temperature: -40 to 60°C
-
Mounting: Pole mount compatible with 25.4 to 60 mm (1 to 2.4") pipe diameter
Q4: Does the Wave-AP-Gen2 have a backup radio?
A4: Yes, the Wave-AP-Gen2 includes a 5 GHz backup radio to maintain connectivity if the primary 60 GHz link experiences interference or outage.
Q5: What software features does the Wave-AP-Gen2 support?
A5: The Wave-AP-Gen2 supports features such as Wave AI, discovery protocol, UISP management, ping watchdog, NTP client, SNMP, and tools like antenna alignment, discovery utility, ping, trace route, speed test, cable test, and site survey.