Ubiquiti Optical Data Transport
Utilises fibre and DC cabling to establish connections with remote PoE devices, delivering both data and power. Offers secure long-distance Gigabit PoE transmission, with dependable 24V/50V passive PoE transport. Enhanced with superior ESD protection and EMI reduction, ensuring reliable operation even in extreme temperatures (-40 to 60° C).
Tech Specs
Click here for the Ubiquiti Optical Data Transport datasheet.
| Device Specifications | |
|---|---|
| Dimensions | 196.4 x 93.5 x 32.4 mm (7.7 x 3.7 x 1.3") |
| Enclosure Material | Polycarbonate |
| Weight | 288 g (10.2 oz) |
| Weatherproofing | IPX5 |
| Surge Protection | Built-in high-current gas discharge tube for DC terminal block and PoE port |
| Networking Interface | (1) 1 Gbps SFP port (1) DC terminal block (1) DC RJ45 port DC injection (1) GbE PoE port (10/100 MbE not supported) |
| Input DC Voltage | 16–57V |
| DC Output | Terminal block, 24V DC/50V DC, 2-wire |
| Power Method | DC Terminal Block, 2-Wire, 24V DC/50 VDC DC in RJ45 Port, 2-pair (4, 5+; 7, 8-) (24V DC input), or 4-pair (24V DC/50V DC input) passthrough PoE RJ45 port, 2-pair (4, 5+; 7, 8-) (24V DC input), or 4-pair (24V DC/50V DC input) PoE passthrough |
| Power Consumption | 1.5W (Typical) |
| ESD Protection | ± 24kV Contact / Air for Ethernet |
| Ambient Operating Temperature | -40 to 60° C (-40 to 140° F) |
| Ambient Operating Humidity | 10 to 95% noncondensing |
| NDAA Compliant | ✓ |
| Certifications | CE, FCC, IC |
FAQs
Q1: What is the Ubiquiti F-POE-G2 used for?
A1: The F-POE-G2 is a Gigabit Power over Ethernet (PoE) injector designed to provide both data and power to compatible Ubiquiti devices over a single Ethernet cable.
Q2: What devices are compatible with the Ubiquiti F-POE-G2?
A2: This PoE injector is compatible with Ubiquiti UniFi and other devices that support Gigabit 802.3af/at PoE standards.
Q3: What is the maximum power output of the Ubiquiti F-POE-G2?
A3: The F-POE-G2 delivers up to 30W of power, ensuring sufficient energy for most Ubiquiti access points, cameras, and network devices.
Q4: How do I install the Ubiquiti F-POE-G2?
A4: Installation is simple: connect the injector to a power source, then run an Ethernet cable from the injector’s PoE output to your device. No additional configuration is required.
Q5: Does the Ubiquiti F-POE-G2 support Gigabit data speeds?
A5: Yes, the F-POE-G2 supports full Gigabit (1 Gbps) data transfer, ensuring high-performance connectivity alongside power delivery for your network devices.