MikroTik S+RJ10 RJ45 SFP+ Copper Module
Please contact us for stocking information.
With the MikroTik S+RJ10 RJ45 SFP+ Copper Module, you can easily enhance your existing products with high speed connectivity up to 10 Gbps without the need for any optical fiber. Simply plug in the module to any MikroTik device with SFP+ ports and your network will be upgraded to the next generation of RJ45 hardware. This advanced module supports jumbo frames up to 10218 Bytes and provides DDM monitoring for supply voltage and module temperature.
Tech Specs
| Device Specifications | |
|---|---|
| Product code | S+RJ10 |
| Suggested price | $65.00 |
| Tested ambient temperature | -20°C to 60°C |
| Storage size | 256 KB |
| Storage type | FLASH |
| MTBF | Approximately 100'000 hours at 25C |
FAQs
Q1: What is the MikroTik S+RJ10?
A: It’s an SFP+ module that provides an RJ‑45 port, enabling multi‑gigabit Ethernet (up to 10 Gbps) over twisted‑pair copper cabling from SFP+ ports.
Q2: What data rates does the S+RJ10 support?
A: It supports six speeds over RJ45: 10 Mb/s, 100 Mb/s, 1 Gb/s, 2.5 Gb/s, 5 Gb/s, and 10 Gb/s.
Q3: How far can it transmit data over copper cable?
A: It supports up to 30 m at 10 Gb/s (with appropriate cabling) and longer distances at lower speeds (up to 200 m for some rates).
Q4: What are the power and thermal requirements?
A: Typical power consumption is around 2.4–2.7 W under load. Because it runs hot, especially at 10 Gb/s, it’s recommended to provide good cooling or avoid placing modules side‑by‑side in densely packed SFP+ cages.
Q5: What are the environmental operating conditions?
A: The module is rated for ambient temperatures from –20 °C to +60 °C, but it can run hotter internally, so proper device airflow is important.