Tycon Systems DC PoE Injector, 18-36VDC IN, 56V 30W Passive PoE OUT - TP-DCDC-2448-HP
The TP-DCDC-2448-HP by Tycon Power is a reliable, cost-effective solution for accessing 56VDC Power over Ethernet from 24V battery systems. It has an integrated PoE injector and can connect to two power sources. With surge and overload protection, it can provide up to 35W of power.
Tech Specs
Click here for the Tycon Power TP-DCDC-2448-HP datasheet.
| Device Specifications | |
|---|---|
| Tycon DC PoE Injector 56V 30W | |
| Input Voltage | ±18VDC to 36VDC |
| DC Input Connector | Removable screw-type compression wire terminal (12 AWG max) |
| PoE Specification | Passive IEEE |
| Output Voltage (±2.5%) | 56VDC |
| Data In & Data/PoE Output Connector | RJ45 (Shielded) |
| Output Current (Max) | 1.46A, 0.5A, 1.5A, 0.625A, 0.625A |
| Output Power (Max) | 30 W |
| Self Consumption Power | 2 W |
| Efficiency (Min) | 75% |
| Line Regulation | 1% |
| Load Regulation | 5% |
| Ripple | 1% |
| Noise | 1% |
| EMC Standards | FCC Class B, NE55022 Class B |
| Safety Standards | IEC 62368-1, EN 62368-1, AS/NZS 62368.1 |
| Operating Temperature | -40 to +70°C (-40 to +158°F) |
| Operating Humidity | 5% – 90% |
| Storage Temperature | -40 to +80°C (-40 to +176°F) |
| MTBF | 106,924 hours |
| Dimensions (L × W × H) | 125 x 75 x 38 mm (4.9 x 3 x 1.5”) |
| Weight | 300 g (10.6 oz) |
FAQs
Q1: What is the Tycon TP‑DCDC‑2448‑HP PoE Injector and what is it used for?
A: The Tycon TP‑DCDC‑2448‑HP is a DC‑powered passive PoE injector that converts a wide 18–36 V DC input into 56 V passive PoE output, supplying both power and Ethernet data to high‑power network devices over a single cable.
Q2: What power output does the TP‑DCDC‑2448‑HP deliver?
A: This PoE injector delivers up to 30 W of passive PoE power at 56 V, making it suitable for high‑power PoE devices such as advanced wireless access points, high‑resolution cameras, and other demanding network equipment.
Q3: What input voltage range does the TP‑DCDC‑2448‑HP support?
A: The unit supports a wide DC input range from 18 V up to 36 V, allowing installation in DC‑powered environments such as battery backup systems, solar installations, telecom racks, and industrial power panels.
Q4: How is the Tycon TP‑DCDC‑2448‑HP installed and powered?
A: The injector is connected directly to a compatible DC power source using secure terminal connections. It then delivers power and Ethernet data together over a single cable to the connected PoE device, streamlining cabling and installation.
Q5: What applications is the TP‑DCDC‑2448‑HP PoE Injector suitable for?
A: This high‑power PoE injector is ideal for outdoor network builds, industrial sites, remote installations, and high‑performance wireless or camera systems where high PoE power and dependable DC operation are required.