Ubiquiti 10/100/1000 24v 1250mA PoE Injector White (2-Pair)
24v 1250mA Power over Ethernet injector for use with a variety Ubiquiti products. Please note this PoE injector uses two pairs to send power, unlike the black variant, which uses four.
Any EU products are supplied with the appropriate UK power method at no extra cost.
Tech Specs
| Device Specifications | |
|---|---|
| Model | POE-24-30W-G-WH |
| Dimensions | 94 x 60 x 33 mm (3.70 x 2.36 x 1.30") |
| Weight | 156 g (5.5 oz) |
| Output Voltage | 25VDC @ 1.25A |
| LAN Activity Indicator | No |
| Gigabit LAN Port | Yes |
| Remote Reset Capability | No |
| Reset Button | No |
| Rated Voltage | 100-240VAC @ 50/60Hz |
| Input Current | 0.6A @ 120VAC 0.4A @ 240VAC |
| Inrush Current | <60A Peak @ 120VAC <120A Peak @ 230VAC |
| Efficiency | 83+% |
| Output Ripple | 1% Max. |
| Switching Frequency | 65kHz |
| Line Regulation | ≤ 3% |
| Load Regulation | ≤ 5% |
| 2-Pair Powering | Pins 4, 5 (+) and Pins 7, 8 (-) |
| 4-Pair Powering | - |
| Operating Temperature | 0 to 40° C (32 to 104° F) |
| Storage Temperature | -30 to 70° C (-22 to 158° F) |
| Operating Humidity | 35 to 95% Noncondensing |
| AC Connector | IEC-320 C6 |
| Data IN / PoE | RJ45 Shielded Socket |
| Surge Protection | Difference and Common Mode |
| Clamping Protection | 11V Data 60V Power |
| Max. Surge Discharge | 1500A (8/20 µs) Power |
| Peak Pulse Current | 36A (10/1000 µs) Data |
| Shunt Capacitance | <5 pF Data |
| Response Time | <1 ns |
| Certifications | CE, FCC, IC, UL |
| NDAA Compliant | Yes |
FAQs
Q1: What is the Ubiquiti POE‑24‑30W‑G‑WH used for?
A: It’s a PoE injector that injects 24 V DC power over Ethernet, allowing you to power compatible PoE devices (e.g. Ubiquiti access points) over a single Ethernet cable — combining both data and power delivery.
Q2: What are the electrical output specifications of the injector?
A: The injector outputs 24 V DC at up to 1.25 A, delivering a total power of 30 W to the connected PoE device.
Q3: What are the input requirements for the POE‑24‑30W‑G‑WH?
A: It accepts a standard mains AC input of 100–240 V AC (50/60 Hz) via the included power cable.
Q4: What kind of network port and data speeds does it support?
A: It provides a Gigabit Ethernet RJ45 port for data passthrough + PoE, ensuring full 1 Gbps network capability to the powered device.
Q5: What environmental and safety protections does the injector include?
A: The unit incorporates surge protection, clamping protection, and is designed with shielding for its RJ45 port. It supports operating conditions from 0 °C to 40 °C, and storage from –30 °C to +70 °C, with non‑condensing humidity tolerance.