airMAX PowerBeam M5 300 ISO
airMAX PowerBeam M5 300 ISO
Product Details
The new Ubiquiti PowerBeam M5 22dBi has a compact design with uniform beam width, efficient footprint and a faster processor. The PowerBeam can be easily mounted in a variety of ways thanks to the innovative mechanical design. The Ubiquiti PowerBeam directs RF energy into a tighter beamwidth resulting with the focus in one direction so the PowerBeam blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.
This model of the PowerBeam leverages Ubiquiti's InnerFeed technology which integrates the radio into the feedhorn of the antenna, so there is no need for any cable, improving performance by eliminating cable losses. By providing increased performance with its faster processor and innovative mechanical design at a low cost, the PowerBeam is extremely versatile and cost-effective to deploy.
The PowerBeam M5 22dBi ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference. With its combination of focused beam directivity and RF isolation, the PowerBeam ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency
Quick assembly - The number of fasteners was reduced to simplify assembly. Tools are required only when the technician mounts the PowerBeam on the pole. Easy removal - The antenna feed can be detached with the push of a button. Dish and brackets - Made of galvanized steel that is powder-coated for superior corrosion resistance. Mounting - Redesigned pole bracket for the 400 mm dish and fender washers for the 300 mm dish prevent paint from being removed from the metal brackets for improved corrosion resistance.
Innovative Mechanical Design
Corrosion Resistance
Built-in mechanical tilt - The mounting bracket conveniently offers 20 of uptilt and up to 20 of downtilt. Fasteners - GEOMET-coated for improved corrosion resistance when compared with zinc-plated fasteners.
The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.
Regional regulations must be observed when deploying radio equipment. More info
Package Contents
- 1x Reflector
- 1x Bolt Set
- 1x Adjustment Bracket
- 1x Rear Housing
- 1x Mounting Bracket
- 1x PoE Injector
- 1x Antenna Feed
- 1x Pole Clamp
- 1x Radome
- 1x UK Mains Cable
Product Features
- Uniform Beamwidth Maximizes Noise Immunity
- Integrated Isolator Design Improves RF Isolation
- High-Speed Processor for Superior Performance
Product Specifications
System
| LEDs | Power, LAN and WAN |
| Extras | GPS Antenna and Reset Button |
| Processor Name | Atheros |
| Router Throughput 5GHz | 150 Mbps |
| Operating System | AirOS |
| Processor Architecture | MIPS 74K |
| Processor Speed | 560 MHz |
| Storage Type | Flash |
| Processor Cores | 1 |
| Storage | 8 MB |
| Memory | 64 MB |
| Memory Type | DDR2 |
Networking
| 10/100/1000 | 1 |
Wireless
| Channel Width | 30, 8, 40, 10, 5 and 20 MHz |
| Rx Sensitivity | -94 dBm |
| VSWR | 1.5:1 |
| Polarisation | Dual Linear |
| Transmit Power | 251 mW |
| Gain | 22 dBi |
| Antenna Type | Dish |
| Frequency Max | 5875 MHz |
| Band | 5 GHz |
| Wireless Standards | 802.11a/n |
| Frequency Min | 5170 MHz |
The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.
Regional regulations must be observed when deploying radio equipment. More info
Power Input
| PoE Ports | 1 |
| PoE Min | 20 V |
| PoE Max | 26 V |
| PoE Pins | 4/5(+),7/8(-) |
| PoE Type | Passive |
| Power Consumption | 6 W |
| Current Min | 0.5 A |
Physical
| Mounting | Pole |
| Mechanical Downtilt Min | -20 ° |
| Mechanical Downtilt Max | 20 ° |
| Dimensions | 664 x 364 x 276 mm |
| Case Material | Plastic |
| Weight | 2550 g |
Environmental
| Operating Humidity Min | 5 % RH |
| Operating Temperature | -40 to 70 °c |
| Shock and Vibration | IEC 68-2-6 |
| Wind Survial | 200 Km‾h |
| ESD/EMP Protection | ± 24kV Air / Contact |
| Wind Loading | 210N @ 200km/h N @ Km‾h |
| UV Resistant | Yes |
| Operating Humidity Type | NonCondensing |
| Operating Humidity Max | 95 % RH |
Compliance
| RoHS | Yes |
| Certifications | RCM, FCC, IC and CE |
Polar Diagrams
These polar diagrams are a guideline only. For detailed polar diagrams please refer to official manufacturer datasheets.
Deliveries Notice
Due to new process changes with our couriers our last order time for next day delivery will be changing, effective immediately. Moving forward, MS Distribution can only guarantee next day delivery for all orders placed before 3.30pm. Orders placed after this time may not be fully processed or despatched until the next working day. We thank you for your understanding.
Recently Viewed Items
airMAX PowerBeam M5 300 ISO
Register for a Trade Account
Get access to a range of exclusive trade benefits✝︎ including:
Trade Discounts
Credit Accounts
Large UK Stock
Register Now
UK Distributor
and provider of professional wired and wireless networking products and solutions for:
All trademarks (™), service marks, trade names, product names and logos appearing on the site are the property of their respective owners.